Best Polyester Cord Strapping Manufacturers in India for Cargo

Introduction

Cargo rarely gets damaged because it was heavy. It gets damaged because it moved. A shift of a few centimetres inside a container on a rough sea passage can crack crates, puncture drums and bend steel.

Polyester cord strapping exists to stop that movement. This guide explains what the product is, how its grades differ, how it compares with steel and PP strap, and how to choose a reliable manufacturer in India. It comes from Amass Strapping Solution, which has manufactured cord strapping and lashing in Rajkot since 2012. You will find properties, comparisons, a buyer’s checklist and answers to common questions.

What Polyester Cord Strapping Is

Polyester cord strapping is a flexible strap made from high-tenacity polyester yarn. The yarn is either woven into a flat band or laid in parallel and bonded with a polymer coating.

It is joined with a galvanised steel wire buckle and tightened with a hand tensioner. The result is a strong, soft-edged strap that can be used on almost any cargo shape.

Common forms

  • Woven cord strap: Yarns are woven into a flexible band. It handles well and grips the buckle firmly.
  • Composite cord strap: Parallel yarns are coated in polymer. It feels stiffer and offers good abrasion resistance.
  • Bonded cord strap: Yarns are glued together without weaving. It is economical for medium loads.

Key Properties

Break strength and system strength

Break strength is the force at which the strap alone fails. System strength is the force at which the strap and buckle together fail. For real cargo, system strength matters more, because the joint is usually the weakest point.

Always ask for system strength figures, not just strap break strength.

Elongation and shock absorption

Polyester stretches slightly under load and returns. This lets it absorb shocks from braking, rolling and wave impact without snapping. Steel strap does not stretch much, so a sudden jolt can break it or loosen it permanently.

Weather and corrosion resistance

Polyester does not rust and handles humidity well. That makes it suitable for long sea voyages and monsoon storage, where steel strap can corrode and stain goods.

Polyester Cord Strap vs Steel and PP Strap

FeaturePolyester cord strapSteel strapPP strap
WeightLightHeavyLight
Sharp edgesNoneYes, on cuttingNone
CorrosionNoYesNo
Shock absorptionGoodLowModerate, stretches a lot
Tension retentionGoodGoodPoor over time
Typical useHeavy and container cargoHot, rigid metal loadsLight cartons

The point most buyers miss is safety. When steel strap is cut under tension, it can whip back and injure the person cutting it. Cord strap releases with far less force. Many export receivers abroad now prefer cord-strapped consignments for this reason alone.

Grades and Sizes

Cord strapping is sold by width and strength class. Typical widths run from about 13 mm to 40 mm, with heavier grades for machinery, steel coils and drums.

As a general guide:

  • 13–19 mm: Cartons, light pallets, small bundles.
  • 25–32 mm: Pallets, crates, drums, general container lashing.
  • 35–40 mm: Heavy machinery, steel products, large bundles.

Final selection should follow the cargo weight, the lashing pattern and the number of straps used.

Applications in Cargo and Containers

  • Lashing drums, IBCs and bags inside containers
  • Securing machinery to skids and flat racks
  • Bundling pipes, tubes and sections
  • Holding pallets together in block stows
  • Unitising timber, tiles and stone slabs
  • Fixing cargo to lashing points on trucks and railcars

How to Choose a Manufacturer

Raw material and consistency

Good strap starts with consistent yarn. Ask what yarn denier and grade is used, and whether strength varies batch to batch.

Testing and strength data

A reliable manufacturer tests break strength and system strength and shares the numbers. Ask for test data for the exact size you plan to buy.

Buckle and tool compatibility

Strap, buckle and tensioner must fit each other. A manufacturer who supplies all three removes the guesswork.

Custom specifications

Some loads need a non-standard width, colour, roll length or print. Check whether the manufacturer can produce to your specification and in what quantity.

Supply capacity and lead time

Export schedules do not wait. Confirm the monthly capacity and typical dispatch time before you commit.

Technical support

The best suppliers advise on lashing patterns and strap counts. That advice often saves more money than any price discount.

A Pattern Worth Knowing

Buyers often choose a heavier strap when a load moves. In many cases the real fix is a better lashing pattern and more straps of the same grade, spread across the load. Load restraint depends on how forces are shared, not only on how strong one strap is.

How Cord Strapping Is Tested

Test data tells you whether a strap will perform the way its label says. A serious manufacturer tests at least three things.

Break strength test

A length of strap is pulled in a tensile testing machine until it fails. The force at failure is recorded as break strength. Several samples from each batch are tested to check consistency.

System strength test

The strap is joined with its buckle, then pulled until either the strap or the joint fails. This is the number that matters in real cargo, because the joint is where most failures start.

Elongation test

The test records how much the strap stretches before it breaks. A controlled amount of stretch helps absorb shock. Too much stretch lets the load move.

What to ask for

  • Test results for the exact width and grade you plan to buy
  • The buckle type used in the system strength test
  • How often batches are tested

If a supplier cannot share any test figures, treat the product as unverified.

Storage and Handling of Strap Rolls

Good strap can lose performance if it is stored badly. A few simple practices keep rolls in working condition:

  • Store rolls flat or on their side, off the floor, on pallets or racks.
  • Keep them away from direct sunlight for long periods.
  • Keep oil, grease and chemicals away from the strap.
  • Use a dispenser or reel stand so strap feeds without twisting.
  • Use older stock first so rolls do not sit in storage for years.
  • Keep buckles dry so they do not corrode before use.

Cargo-Specific Strapping Tips

Drums and IBCs

Strap drums in groups of four or more so they act as one block. Loop lashing around the group resists sideways roll. Keep buckles on flat faces, not on drum rims.

Steel pipes and sections

Bundle first with medium-grade strap, then lash the bundles with heavier strap. Place straps at regular gaps along the length so the bundle cannot flex.

Ceramic tiles and stone

Use edge protectors on every corner the strap touches. Tiles and slabs chip easily under point pressure, and a corner board spreads that pressure.

Machinery on skids

Fix the machine to its skid, then direct-lash the skid to container lashing points in at least four directions. Pad any polished or painted surface.

Cost per Load, Not Cost per Roll

Buyers often compare cord strap by price per roll or per metre. A better measure is cost per secured load.

That figure includes the strap, the buckles, operator time and any damage claims. A slightly costlier strap that holds better and applies faster usually lowers total cost. One avoided damage claim on an export shipment can pay for many months of strap.

Frequently Asked Questions

Is polyester cord strapping as strong as steel?

Heavy grades of cord strapping offer system strengths suitable for many loads that once used steel. It also absorbs shock better. For hot or very sharp loads, steel may still be preferred.

Can cord strap be reused?

Cord strap is normally cut and discarded after one use. Wire buckles are also single-use for safety.

What buckle should I use?

Use a galvanised wire buckle sized for your strap width. Heavy grades may need phosphated or heavy-duty buckles for higher system strength.

Does cord strap loosen during long voyages?

Properly tensioned polyester cord strap holds tension well. Loosening usually points to low initial tension or a mismatched buckle.

Can I get custom widths or printed strap?

Many manufacturers, including Amass, produce to specification. Share your load details and quantity for a quote.

What tool do I need for cord strapping?

A manual cord strap tensioner is enough for most cargo. It tightens the strap before the wire buckle locks it, and it needs no power supply.

Conclusion

The best polyester cord strapping manufacturer gives you clear system strength data, matched buckles and tools, and advice on how to lash your cargo. Ask for samples and test them on your real load before you scale up.

Polyester Cord Strapping Made to Your Specification

Amass Strapping Solution has manufactured polyester cord strapping, container lashing strips and wire buckles at Shapar (Veraval), Rajkot since 2012. We make strap to your exact width, grade and roll length, with buckles matched to every size.

Request a sample and system strength data today. Call +91 99250 03577, email amass.india@yahoo.com, or visit amass-strap.com.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top